CD36
E-8
E
n
g
li
sh
CD36
E-9
Technical specifi cation
Digital to Analogue conversion
High performance 192kHz 24-bit sample rate converter and multiple 24-bit digital to analogue
conversion
Laser pick-up
3 beam
Laser wavelength
780nm
Numerical aperture
0.45
Signal to noise ratio
114dB
Harmonic distortion, 24-bit (1kHz)
0.0008% *
Frequency response (±0.5dB)
0.15Hz–20kHz
Output level (0dB)
2.2Vrms
Output impedance
47Ω
Minimum recommended load
5kΩ
* Using 16-bit, triangular p.d.f. dithered data
Physical
Dimensions
W430 x D290 x H85mm
Weight
5.6kg nett/7.5kg packed
Power consumption
32VA maximum
Digital output connection
75Ω co-axial
optical TOSLINK
Supplied accessories
Mains lead
CR-314 remote control
2 x AAA batteries
E&OE
NOTE
: All specifi cation values are typical unless otherwise stated.
Continual improvement policy
Arcam has a policy of continual improvement for its products. This means that designs and
specifi cations are subject to change without notice.
Radio interference
The CD36 player is a digital audio device which has been designed to very high standards of
electromagnetic compatibility.
Both CD players and DACs generate, and can radiate RF (radio frequency) energy. In some cases this
can cause interference with FM and AM radio reception. If this is the case, keep the CD player and its
connecting cables as far from the tuner and its aerials as possible. Connecting the CD player and the
tuner to different mains sockets can also help to reduce interference.
EC COUNTRIES – These products have been designed to comply with directive 89/336/EEC.
USA – These products comply with FCC requirements.
Laser radiation
If an Arcam CD player is operated whilst the outer casing is removed, invisible laser radiation could
cause eye damage.
