![background image](http://html.mh-extra.com/html/arcam/a19/a19_handbook_2963523008.webp)
E-6
A19
connections
Note
Please read the ‘Placing the unit’, ‘Power’ and
‘Interconnect cables’ sections on page 5 before
connecting up your A19 integrated amplifier!
110-120V/220-240V
SUPPLY
VOLTAGE
~ 50-60 Hz
OUTPUT: 6V DC 1A
ACCESSORY
POWER
TUNER
CD
PHONO
(MM)
RECORD
OUT
PRE
OUT
PHONO
GROUND
ONLY
SWITCH POSITIONS
115 = 110 - 120V~
230 = 220 - 240V~
4–16 OHMS. CLASS 2 WIRING
AV
PVR
BD
SAT
POWER INLET
350W MAX
Audio inputs
The labels above the connectors give
suggested audio inputs, although any
suitable device may be connected to the
line-level inputs. (Note, however, that the
name of the input shown on the front-
panel display cannot be changed.)
AV, PVR, BD, SAT, TUNER
and
CD
are all line-
level inputs.
The
PHONO (MM)
input has different
characteristics. See page 7 for more
information and page 12 for the phono
input specification.
Pre-amplifier output
PRE OUT
provides the pre-amp output for
use in a bi-amplified system (for example,
with a P38 power amplifier).
See page 9 for more information.
Record output
RECORD OUT
is a line level output for use in
recording from other sources.
See page 7 for more information.
Speaker terminals
See page 9 for information on
connecting loudspeakers.
Power inlet
Connect the correct
mains cable here.
Voltage select
Ensure that the voltage selected
matches your local power supply.
Accessory Power
3.5mm mono jack socket for
accessory power cable (supplied).
The cable provides two 2.1mm DC
jacks to power rLink and/or rBlink
accessories.
A19 INTEGRATED AMPLIFIER
AUX
PHONES
POWER
Aux input
Analogue 3.5mm stereo jack socket,
intended for connecting a portable
MP3 player.
Phones
3.5mm stereo jack socket,
intended for use with a set of
headphones.
See page 10 for more
information.
Phono earth terminal
For connecting your turntable
earth lead, if required.
Note that this terminal must
not be used as a safety earth.