IV
V
Device Connectivity
Step 1 - Connect one end of the provided Ethernet cable into the LAN ports
on the Wireless Access Point. Then insert the other end of the cable into the
Ethernet port of your PC or other Ethernet network device.
Step 2 - Plug the power adapter into the power socket on the rear of the
access point, and the other end into a power outlet.
Step 3 - Wireless Link: On the Windows desktop, click Start/Control
Panel/Network and Internet/View network status and tasks/Connect to a
network to browse the available wireless networks. Choose Enterprise
Access Point from the list and click Connect button to start using the wireless
network.
Wall Mounting
There are two slots on the base of the access point for mounting the device
on the wall. You will need two screws of less than 5 mm in diameter to wall
mount the access point.
To wall mount the device:
1. Determine where you want to mount the access point. Make sure you
choose a central location away from potential sources of interference like
microwave ovens and cordless phones.
2. Drill two holes into the wall and insert your two screws 128 mm apart to
hang the device.
3. Insert a screw into each hole, and leave 5 mm of each head exposed.
4. Maneuver the device so the wall-mount slots line up with the two screws.
5. Place the wall-mount slots over the screws and slide the device down until
the screws fit snugly into the wall-mount slots.
Note:
When wall mounting the access point, be sure that it is within reach of
the power outlet or alternative sources of power supply.
