manualshive.com logo in svg

ARCA GRA115RO, Installation - Use - Maintenance, Page: 29 / 47

Share
Download
ARCA GRA115RO Installation - Use - Maintenance Download Page 29

 

29

9) Press MENU. 
10) Set the hours using buttons 3 and 4. 
11) Confirm by pressing the MENU button. 
12) Set the minutes using buttons 3 and 4. 
13) Confirm by pressing the MENU button. 
 

14) Repeat the same operations described above to 
set the OFF time. 

15) Press button 3 to set the second program or ESC to exit. 
 

 
SETTING THE WEEKEND PROGRAM: 
 

The WEEKEND program is used to set the same boiler on / off times for every day from Monday to Friday 
and the same times for Saturday and Sunday. Three time bands are available (each has an ON time and an 

OFF time). 
 
The top display shows 4 dashes if programming is not enabled or displays the ON and OFF times if 

programming is enabled. 
 
The ON light indicates the ON time, while the OFF light indicates the OFF time. 
1) Press MENU. 
2) Press button 3 repeatedly until the top display shows CRON. 
3) Press MENU. 

4) The display shows PROG. 

 

5) Press button 3 repeatedly until the top display 

shows FISE. 

6) Press MENU. 

7) The top display shows 4 dashes, the bottom right 
display shows the program number (from 1 to 3), the 
bottom right display shows LU, indicating the days 

from Monday to Friday. 
The ON light comes on. 

 

 
 

 

Summary of Contents for GRA115RO
















































Reviews:

No comments