background image

2 Safety

ARCA Regler GmbH

8 / 42

Series 827S.E/X

09.2019 / 1.0

 WARNING

means that death or serious injuries can occur if the corresponding
preventive measures are not taken.

 CAUTION

with a warning triangle means that slight injury and/or damage to
property can occur if the corresponding preventive measures are
not taken.

NOTICE

indicates an important item of information about the product itself
or how the product should be handled, to which special attention
should be paid.

CAUTION

without a warning triangle means that damage to property can occur if
the corresponding preventive measures are not taken.

ATTENTION

indicates that an undesirable event or condition can occur if the corres-
ponding instructions are not observed.

If several danger levels occur, the warning note for the respectively
highest level will always be used. If a warning note with a warning tri-
angle warns against personal injury, a warning against damage to prop-
erty may be included in the same warning note.

2.4

Warning symbols on the device

Symbol

Explanation of the warning symbols on the device

Observe the operating manual

Protect the device against shocks (otherwise the protection
class is not guaranteed)

2.5

Intended use

Observe the following:

 WARNING

ARCA signal boxes may be used only for the applications foreseen
in the associated technical documentation. Proper transport, stor-
age, erection, assembly, installation, commissioning, operation and
maintenance are required for trouble-free and safe operation. The
permissible environmental conditions must be maintained. Notices
in the associated documentation must be observed.

Summary of Contents for 827S.E Series











































Reviews: