ARCA Regler GmbH
2 Safety
Series 814
9 / 28
11.2022 / 1.1
Repair work may be carried out only by trained and qualified technical
personnel.
Work on electrical equipment may be carried out only by trained electri-
cians or persons who have received electrotechnical instruction.
Persons
Activity
Instructed
persons
Persons
with a recog-
nised tech-
nical educa-
tion
Persons
with a recog-
nised elec-
trotechnical
education
Superiors
with relevant
skills
ARCA ser-
vice person-
nel
Transport
X
X
X
X
X
Installation
X
X
X
X
X
Commissioning
X
X
X
X
Maintenance
X
X
X
X
X
Fault finding
X
X
X
Mechanical
troubleshooting
X
X
Electrical
troubleshooting
X
X
Repairs
X
X
X
X
Disposal
X
X
X
X
X
2.8
Operator's duty of care
To avoid accidents, malfunctions and environmental impacts, the re-
spective person responsible for the transport, commissioning, operation,
maintenance and disposal of the product must ensure the following:
▪ Observation of all warning and danger notices.
▪ Regular instruction of personnel on all applicable questions of work
safety, the operating manual and in particular the safety instructions
that it contains.
▪ Regulations and work instructions for safe working as well as the cor-
responding instructions for the conduct of the personnel in case of
accidents and fire are to be kept at the ready at all times and hung
up in the plant if necessary.
▪ Operate the product only if it is in perfect working order.
▪ Use only spare parts, lubricants and operating resources approved
by the manufacturer.
▪ Observe the specified operating conditions and requirements at the
place of installation.
▪ Provide all necessary devices and the personal protective equipment
required for the respective task.
▪ Refer to the chapter entitled Maintenance for the prescribed mainten-
ance intervals and comply with the corresponding regulations.
▪ Allow installation, commissioning and maintenance of the product to
be carried out only by qualified and trained personnel in accordance
with this operating manual.
▪ The operator must ensure that the product is used for its intended
purpose.
