8
Issue Date: 5/2/2020
U
N
-P
AIRING
Removing single Device:
1. Press
‘Learn’
once (LED on module will flash), this will enter learning mode.
2. With a remote control press the
‘OFF’
button intended to be un-paired; LED
on module will flash to confirm that the remote control is un-paired.
C
LEARING
A
LL
M
EMORY
Removing all memory stored in the module.
1. On the module hold down the
‘Learn’
button for 6 seconds, LED on module
will flash.
2. Release button then press again, this will remove all memory stored in the
module.
PAIRING / UN-PARING DEVICE
