
Flex ECO 4S/4X/8S/8X/12S/12X Instruction Manual
April 2015
Page 18 of 36
7
1
4
2 3
5 6
8
4.2 Receiver
4.2.1 Channel Settings
Set the receiver channel by configuring the channel
dipswitch located on the RF/decoder board, only the first 6
dip positions are used for channel programming. The
system channels table on section 4.2.7 illustrates which
dipswitch setting corresponds to which channel. Once the
receiver channel is altered do make sure to change the
transmitter channel as well. The channel on both transmitter
and receiver must be identical in order for the system to
work (refer to section 4.1.2 Transmitter Channel Settings).
Example:
Top position
→
“1”
Bottom position
→
“0”
The above dipswitch setting
“1 0 0 1 0 0”
corresponds to “channel 36” in the system channels table
on section 4.2.7.
4.2.2 Output Relay Configurations
4.2.2.1 Output Relay Types
1. 2 output relays per motion – single speed only
Output relays with Forward (F) and Reverse (R) speed.
2. 3 output relays per motion – shared 2
nd
speed output relay
Output relays with Forward 1
st
speed (F1), Reverse 1
st
speed (R1) and
Forward/Reverse 2
nd
speed (F/R2). Forward and Reverse 2
nd
speed (F/R2)
shared the same output relay.
3. 4 output relays per motion – separate 1
st
and 2
nd
speed output relays
Output relays with Forward 1
st
speed (F1), Reverse 1
st
speed (R1), Forward
2
nd
speed (F2) and Reverse 2
nd
speed (R2). Forward and Reverse 2
nd
speed
with separate output relays.