Player Installation:
Remove the change tray from the bin, this will no longer be used.
Cut out supplied template along black lines.
Unsnap plastic bin sides to reveal mounting screws, as pictured.
Apply templates and tape
into place.
Follow
direction
on
templates to drill (2) 1/8”
holes and (1) 1 ¼” hole.
Route wiring through 1/ ¼”
hole and plug into CD
player. May also be done
after installation of player.
7.
Install CD player in opening, aligning threaded
stand-offs with new 1/8” holes.
Use screws removed from player in Step 1 to
secure player in place using 1/8” holes and
threaded stand-offs.
Re-install bin sides, re-install bin in dash, and
route wiring behind radio (see next section for
radio removal).
Leave sufficient slack in wire to allow bin to
open and close without pinching or stretching wire.
Summary of Contents for ARC-CDJPLAYER
Page 10: ...Find more great ARC products on our website V1 1 9 29 16...
Page 11: ......
