6 | Arbpro LD1 - Instruction Manual
6
Installation
ARBPRO LD1 can be installed on the same tree where the job will be done or on a
different tree. User must be sure that the tree is strong enough.
Two different types of installation are possible:
♦
“Light” this installation is recommended if the tree must be preserved. For this in-
stallation rubber pads (6) must be mounted in the slots on back of the main frame.
Safe working load with this type of installation is kg 800 (with both winch or decending
brake installed).
Straps assembly (in all kind of
installation):
Check straps before installa-
tion.
Install straps by inserting the hooks into the
rings placed on side of main frame (Atten-
tion! Ratched bar should be mounted facing
outside). Straps must be at 90°. Any other
angle in not correct and potentially dange-
rous.
Tighten straps by pulling on ratched bar to
reach a good anchorage.
Fig 4
Summary of Contents for KG 1000
Page 1: ...ARBPRO LD1 Italiano Manuale di istruzioni ...
Page 14: ......
