Maintenance 11
•
Blade sharpening - Mini Woodcarver Blade:
1. Unplug the Mini Grinder.
2. Use a (5/32´´) or 4 mm round metal file
(MIN.FG.002). When sharpening hold the file at
90
0
to the blade, keeping the file level.
(as shown in fig.15)
•
Checking adaptor plate
Ensure that the Mini-Grinder adaptor plate is
always mounted securely. If loose, tighten the
three adaptor plate screws as shown in fig.16.
Note: The arm must be removed to be able to
tighten the adapter plate screws to the
casting of the grinder
Fig.15
Fig.16
90
o
Sharpening Angle
Cleaning the grills and switch
Regulary check to see if any dust or foreign matter
has entered the grills positioned on the front and
back of the motor or under the switch (as shown
in fig.17).
If so use a soft brush to remove any accumulated
dust. To clean grills and switch
Fig.17
SAFETY
ALWAYS USE EYE PRETECTION
ALWAYS UNPLUG FROM THE WALL WHEN CLEANING
Summary of Contents for Mini-Grinder
Page 18: ...NOTES ...
Page 19: ...NOTES ...
