Arboria VISTA ARBOR Assembly Instructions Download Page 3

Page: 3 / 4

Product ID 820.1325 / Instruction ID 445.35.14

Page 3 of 4

Updated 11/15/12

Arboria is a division of LWO Corp. / PO Box 17125 / Portland, OR / Cust. Serv. 800-459-8718 / Fax 503-286-4092 / www.arboria.com

VISTA ARBOR

ASSEMBLY INSTRUCTIONS

GARDEN STRUCTURES

Position second side panel under canopy. When flush and aligned
with pencil mark fasten every other slat.

Cautiously raise the arbor to a standing position.
Your arbor is now assembled. Follow directions on next page to anchor your arbor.

STEP 4

STEP 3

Align second canopy with pencil marks on gable ends and fasten remaining . screws
through every other slat into each gable.

STEP 5

Pencil marks

Summary of Contents for VISTA ARBOR

Page 1: ...ke kit 1 Power screwdriver or drill Tape measure Concrete mix 2 60 lb bags Handy to have Level NOTE This arbor requires staking in concrete or a similarly secure medium See page 4 for instructions Cho...

Page 2: ...with bottom of gable Fasten in place Position side panel on edge with the heads of screws installed in step 1 facing inward Place canopy on top of gables The vertical wood slat on the underside edge...

Page 3: ...DEN STRUCTURES Position second side panel under canopy When flush and aligned with pencil mark fasten every other slat A A A A Cautiously raise the arbor to a standing position Your arbor is now assem...

Page 4: ...ntegrity of your garden struc ture is not compromised during this process The inher ent rot and pest resistance of the wood will provide a degree of protection and help your garden structure to endure...