Product ID 820.1325 / Instruction ID 445.35.14
Page 1 of 4
Updated 11/15/12
Arboria is a division of LWO Corp. / PO Box 17125 / Portland, OR / Cust. Serv. 800-459-8718 / Fax 503-286-4092 / www.arboria.com
VISTA ARBOR
REVIEW ALL STEPS BEFORE STARTING ASSEMBLY
ASSEMBLY INSTRUCTIONS
GARDEN STRUCTURES
HARDWARE LIST
PRELIMINARIES
TOOLS REQUIRED
ASSEMBLED PRODUCT
PARTS LIST
Win FREE Arboria Products
Give us feedback about this Arboria product and
be entered into a drawing to win Arboria goods.
It’s easy, go to www.Arboria.com, choose a prod-
uct then click on the link to review. Be sure to en-
ter your email and telephone so that we may con-
tact you if you win. Upload a photograph for an
extra chance to win.
Visit www.Arboria.com for offi-
cial rules. No purchase necessary.
Quantity
1” Screw (16)
3” Screw (8)
Stake kit (1)
Power screwdriver or drill
Tape measure
Concrete mix, 2 - 60 lb bags
Handy to have:
Level
NOTE: This arbor requires staking in concrete or a
similarly secure medium. See page 4 for instructions.
Choosing not to secure the arbor may compromise the
structure’s integrity.
Selecting a Work Area
Select an area close to where the arbor will be installed.
The assembly area should be relatively flat and open, at
least 8’x6’. A lawn, driveway or wide path will be satisfac-
tory. It is a good idea to lay out the arbor box on your work
surface to protect the arbor from nicks and scratches. Two
people are recommended to complete the assembly proc-
ess. Always use caution when assembling or moving the
arbor.
Optional Painting or Staining
If you wish to stain or paint your arbor, we recommend ap-
plying to individual components before assembly to ensure
fullest coverage. Use a high quality exterior stain or paint.
Be careful not to cover up pencil marks.
A
B
1
2
3
Gable
Canopy
Side Panel
C
1
2
2
3
3
