Product ID 820.1486 / Instruction ID 445.35.67
Updated 12/8/15
LWO Corp. / PO Box 17125 / Portland, OR / Cust. Serv. 800-459-8718
GABLE ARBOR
ASSEMBLY INSTRUCTIONS
GARDEN STRUCTURES
STEP 1
STEP 2
Align bottom of each brace with
pencil marks on side panel posts.
Fasten in place as shown with a
2½” screw.
Repeat Step 1, attaching braces
to the second side panel.
B
B
Pencil
mark
IMPORTANT NOTE:
Prior to
repeating this step, as instructed
below, measure the distance
between the two side panels. The
distance between the two panels at
the top of the arbor must equal the
distance between the two panels at
the base of the arbor.
Repeat Step 2 with second side
panel at other end of header.
Align top of side panel post precisely with pencil mark on
inside of header. Fasten post to header with a single 1¼”
screw (second screw will be fastened later).
Fasten brace to header in the same fashion, using only a 1¼”
single screw. Ensure post remains aligned with pencil mark.
A
Pencil
marks
A
