Product ID 820.1486 / Instruction ID 445.35.67
Updated 12/8/15
LWO Corp. / PO Box 17125 / Portland, OR / Cust. Serv. 800-459-8718
GABLE ARBOR
REVIEW ALL STEPS BEFORE STARTING ASSEMBLY
GARDEN STRUCTURES
HARDWARE LIST
PRELIMINARIES
TOOLS REQUIRED
ASSEMBLED PRODUCT
PARTS LIST
Quantity
1¼” Screw
(28)
2½” Screw
(4)
Spacer block
Anchor stake kit
1
3
Power screwdriver or drill
Tape measure
Handy to have:
Stool or short ladder
Bit holder may be needed if using a drill with a
quick-change chuck
Selecting a Work Area
Select an area close to where the arbor will be installed.
The assembly area should be relatively flat and open, at
least 9’x7’. A lawn, driveway or wide path will be
satisfactory. It is a good idea to lay out the arbor box on
your work surface to protect the arbor from nicks and
scratches. Two people are handy for the assembly process.
Always use caution when assembling or moving the arbor.
Optional Painting or Staining
If you wish to stain or paint your arbor, we recommend
applying to individual components before assembly to
ensure fullest coverage. Use a high quality exterior stain or
paint. Be careful not to cover up guide marks on arches.
2
3
4
A
B
1
2
3
4
Header Assembly
Side Panel
Cap
Brace
GA
C
D
ASSEMBLY INSTRUCTIONS
