Arbor Technology PC1017, User Manual

Page: 23 / 30

- 9 -
Getting Started
No. Item Descriptions
8 USB port USB 2.0 Type-A port. To connect to a USB device.
9 DC-IN jack
DC 12V power input jack. To connect to a power outlet using
the provided power adapter.
10 LAN port
10/100M RJ-45 port with PoE support.
To connect to a PoE power sourcing equipment (PSE), such as
a switch or hub, to provide power to the terminal.
As PoE provides both data and power connections in one
Ethernet cable, the PoE connection eliminates the need for
connecting the DC-IN jack to a power outlet.
The RJ-45 connector comes with LED to indicate the power
source:
Green: Power is supplied from DC power jack.
Orange: Power is supplied from PoE.
2.2 Connection
1. Before proceeding, remove the cover of the I/O ports.
Lift up the bottom of the cover a little bit and then release the cover from
the latch.
a
b
2. Connecting your USB peripheral to the terminal as needed.
The terminal comes with a USB port for connection of USB peripherals
(e.g., USB flash drive, keyboard, mouse, printer) to the terminal. To use this
port, simply connect the USB peripheral to the USB port on the rear of the
terminal.