Arbor Technology PC1015, User Manual

Page: 25 / 30

- 11 -
Getting Started
PoE power
Regular power
To connect the terminal to AC power:
Locate the DC-IN jack on the rear of the terminal. Plug the DC cord of the
power adapter into the DC-IN jack. Then plug one end of the AC power
cord into the AC adapter and the other end into an electrical outlet.
Make sure to use the AC power adapter supplied with the terminal. The
power adapter specification is as below:
Item Descriptions
Brand ADAPTER TECH.
Model ATM030-P120
Input 100~240V, 50~60Hz
Output 12V, 2.5A, 30W Max.
Warning:
Use only the power adapter that comes with your terminal. Using
a different power adapter may damage the terminal and invalidate warranty
applying to the terminal.
If the power source is PoE PSE, connect the Ethernet cable (not provided)
to the terminal's LAN port and a PoE-capable router or switch.
As PoE transmits both data and power in one Ethernet cable, if you are
using the PoE connection, there is no need for connecting the DC-IN jack
to a power outlet.