Arbor Technology M1859, User Manual

Page: 31 / 84

- 15 -
Getting Started
Caution:
• Do not spill liquids on or around the medical computer.
• Do not use other solutions than the ones mentioned above.
• Do not touch, press or rub the display panel with abrasive cleaning
compounds, instruments, brushes, or rough-surface materials.
• Never spray cleaning liquids or foam onto the medical computer or soak it
for cleaning.
• Do not use solvents to clean the unit.
• Do not clean, disinfect, or sterilize any part of the system by autoclaving or
with the use of ethylene oxide gas; doing so may damage the unit.
• Never spray or squirt any type of liquid onto the medical computer; if a
spray, gel or foam is needed, spray the liquid onto a cloth and then use the
cloth to wipe or rub down the component.
• Always avoid contamination to minimize the need for disinfectants.
• Do not spill, spray, or squirt liquids to the power block and the power cable.
2.3 Drivers and Utilities Installation
The computer comes with a CD that contains device drivers as well as some
programs and utilities. You need to install the drivers to activate the devices
and some device-related services. Some drivers will come with driver-related
programs to facilitate the application. To install the drivers and utilities, make
sure to follow the instructions (e.g., the installation sequence) given in this
section to proceed.
In addition, the CD includes a number of optional utilities. You may install those
utilities as needed.