2
Installing microSD/SDHC Card
Connecting USB Devices
The terminal comes with two USB ports for connection of USB peripherals (e.g.,
USB flash drive, keyboard, mouse, printer) to the terminal.
•
USB Type-A port:
To use this port, simply connect the USB peripheral to
the USB port on the rear of the terminal.
•
OTG Micro USB port (hidden):
Alternatively you can use this USB port in
case the one on the rear of the terminal has
already been occupied. To use this port, use
a torx screwdriver to loosen and remove the
screws securing the sheet metal. Then you
will need an OTG cable (not included) to
make the connection as shown to the right.
OTG cable
1.
Use a torx screwdriver to loosen and remove the screws securing the sheet
metal.
2.
Locate the microSD/SDHC card slot and insert your microSD/SDHC card.
Firmly insert the card until it is all the way in. The card only fits one direction
as shown below.
Make sure to fully
insert the card until
it is all the way in
to ensure the card
can be detected.
3.
To verify if the card is successfully inserted, tap the
File Manager
App and
you should find the SD Card storage.
4.
Restore the sheet metal cover and secure it with the two torx screws.
