Arbor Technology FPC-9000-V1, User Manual

Page: 51 / 96

- 39 -
Installation & Maintenance
7. Restore the top cover to the computer by fastening the 4 screws as shown
below. Note that the 2 screws in the middle are used to secure the top
cover to the heat sink. Make sure they are tightened to ensure the heat
dissipation.
Make sure to
tighten the screws
to ensure the heat
dissipation.
4.1.3. Install/Uninstall Memory Modules
The main board has two memory module (DIMM) sockets. Increase memory
capacity to make programs run faster on the system. The memory module for
the FPC-9000-V1’ SO-DIMM sockets should be a 260-pin DDR4 with a “key
notch” off the centre among the pins, which enables the memory module for
particular applications. There are another two notches at each left and right
side of the memory module to help fix the module in the socket.
key notch
side notch
side notch
To install a DDR4 memory module:
1. Remove the top cover from the computer as described in
4.1.1.2. Remove
Top Cover
on page 34 .
2. Locate the SO-DIMM sockets on the main board.