Arbor Technology EPC-20X0-2610UE, User Manual

Page: 23 / 103

- 13 -
General Information
EPC-2020-2610UE EPC-2030-2610UE
Both EPC-2020-2610UE and EPC-2030-2610UE provide two Intel®
WG 82583V & WG82574L 10/100/1000 Base-T Ethernet (RJ-45) interface.
For network connection, follow the instructions below:
1. Turn off the BOX PC system and the Ethernet hubs.
2. Plug in one end of cable of a 10/100/1000Base-T hub to the system's
RJ-45 jack.
1.8.3 LAN Ports
To connect to any serial device, follow the steps below:
1. Turn off the BOX PC system and the serial devices.
2. Attach the interface cable of the serial device to the serial connector.
Be sure to fasten the retaining screws.
3. Turn on the computer and the attached serial devices.
4. Refer to the serial device's manual for instructions to configure the
operation environment to recognize the new attached devices.
5. If the serial device needs specified IRQ or address, you may need to
run the CMOS setup to change the hardware device setup.