- 2 -
- 3 -
Packing List
Before you begin installing your single board, please make sure that the
following materials have been shipped:
1 x EmETXe-i89M0 COM Express CPU Module
1 x Quick Installation Guide
If any of the above items is damaged or missing, contact your vendor
immediately.
COM Express supports seven pin-out Type applying to Basic and Extended
form factors:
Module Type 1 and 10 support single connector with two rows of pins (220 pins)
Module Type 2, 3, 4, 5 and 6 support two connectors with four rows of pins
(440 pins) Connector placement and most mounting holes have transparency
between Form Factors.
The differences among the Module Type 6 and EmETXe-i89M0 are summarized
in table below:
Module Type
Standard Type 6
EmETXe-i89M0
Connectors
2
2
Connector Rows
A, B, C, D
A, B, C, D
PCIe Lanes (Max)
24
24
LAN (Max)
1
1
Serial Ports (Max)
2
2
Digital Display I/F
(Max)
3
3
USB 3.0 Ports (Max)
4
4
Specifications
System
CPU
Soldered onboard 6
th
Generation Intel
®
Core™ i7-6822EQ
2.0GHz (Base) / 2.8GHz (Turbo)
Chipset
Intel
®
PCH QM170
Memory
2 x DDR4-RS SO-DIMM sockets
BIOS
AMI UEFI BIOS
Watchdog Timer
1~255 levels reset
I/O
USB Port
8 x USB 2.0 ports
4 x USB SuperSpeed ports
Serial Port
2 x UART ports (RX/TX only)
Storage
4 x Serial ATA ports with 600MB/s HDD transfer rate
Expansion Bus
8 x PCIex1 lanes, 1 x PCIex16 lane,I2C
Interface,GPIO
Ethernet Chipset
1 x Intel
®
i219LM PCIe GbE PHY with iAMT
Audio
HD audio link
TPM
TPM supported (OEM request)
Display
Graphics Chipset
Intergrated Intel
®
HD Graphics 530
Graphics Interface
LCD: Dual Channels 24-bit LVDS
3 x DDI ports
Mechanical & Environmental
Power Requirement 5V~20V +/- 5% wide range voltage input, +5VSB
Power Consumption 2.58A@12V(i7-6822EQ typical)
Operating Temp.
-40 ~ 85°C (-40 ~ 185°F)
Operating Humidity
10 ~ 95% @ 85ºC (non-condensing)
Dimension (L x W)
125 x 95 mm (4.9” x 3.7”)
