01945 410950 [email protected]
http://www.arborgardensolutions.co.uk
Trading address: Unit 11, Cattle Dyke, Wisbech, England, PE1 34NR
Align one of the longer posts (shorter for a
reversed roof) with the other end of the back
panel.
Attach the panel to the post by screwing
through the batten using 65mm screws as
before.
Rearrange the spacer blocks and offer up the
next panel, aligning and attaching it as before.
Remove the blocks from beneath the 2nd panel
and then slide the base into position as shown,
ensuring that the centre post and the central
cross member of the base are aligned in the
middle of the back assembly.
Step 7
Step 8
Step 9
Step 10
