Arbor Technology ARTS-2870 User Manual Download Page 74

Page: 74 / 94

- 64 -

BIOS

5.1.2.7. F71869E Super IO Configuration

This submenu opens in context with the system’s serial ports, COM1 and COM2,

to configure the Super IO chipset.

The featured settings are:

Submenu/Setting

Description

Serial Port 1

Configuration

Configures the system’s serial port (COM port). The featured settings are:

Setting

Description

Serial Port

Enables/disables the serial port.

Enabled

is the default.

Serial Port 1

Options available are:

RS232 Support

RS422

Support

RS485 Support

Serial Port 2

Configuration

Configures the system’s serial port (COM port). The featured settings are:

Setting

Description

Serial Port

Enables/disables the serial port.

Enabled

is the default.

Serial Port 2

Options available are:

RS232 Support

RS422

Support

RS485 Support

Serial Port 3

Configuration

Configures the system’s serial port (COM port). The featured settings are:

Setting

Description

Serial Port

Enables/disables the serial port.

Enabled

is the default.

Serial Port 4

Configuration

Configures the system’s serial port (COM port). The featured settings are:

Setting

Description

Serial Port

Enables/disables the serial port.

Enabled

is the default.

Serial Port 5

Configuration

Configures the system’s serial port (COM port). The featured settings are:

Setting

Description

Serial Port

Enables/disables the serial port.

Enabled

is the default.

Serial Port 6

Configuration

Configures the system’s serial port (COM port). The featured settings are:

Setting

Description

Serial Port

Enables/disables the serial port.

Enabled

is the default.

Summary of Contents for ARTS-2870































































































Search results

Summary of Contents for ARTS-2870

Reviews:

Brands by name

Popular brands

Arbor Technology ARTS-2870, User Manual

Search results

Summary of Contents for ARTS-2870

Reviews:

Brands by name

Popular brands