- 8 -
System Quick Start
2.1 Assembly & Mounting
Figure 2.1: HDD with BOTTOM Assembly
2.1.1 HDD Installation
HDD Assembly
SATA HDD
Thermal pad
HDD Holder bracket
Screw for fixing HDD
Screws for fixing the HDD Holder bracket
Screw for fixing HDD
Step 1: Unscrew the three screws which fix the HDD Holder bracket to the
main unit. Keep the screws safely for later use.
Step 2: Note that the SATA cable and power cable are attached to the con-
nectors of the HDD Holder bracket. To take the bracket off the unit,
pull the SATA cable off the connector by pressing the latch securing
the SATA cable.
Step 3: Stick the accompanying thermal pad to the HDD properly.
Step 4: Insert the HDD into the connector of the bracket and then fix the
HDD to the bracket by the accompanying four screws for the most
effective heat dissipation.
Step 5: Remember to connect the SATA cable back into the connector of the
HDD Holder bracket.
Step 6: Use the three screws removed before to fix the HDD Holder bracket
to the main unit.
