Arbor Technology ARES-1500-A10, User Manual

Page: 72 / 109

- 60 -
BIOS
5.2.3. IDE Configuration
Select IDE Configuration to view the information about the mSATA storage
present in the system.
5.2.4. USB Configuration
Select this submenu to view the status of the USB ports and configure USB
features. The featured settings are:
Setting Description
Legacy USB Support
Enables/disables legacy USB support.
Options available are Enabled (default), Disabled and
Auto .
Select Auto to disable legacy support if no USB device
are connected.
Select
Disabled
to keep USB devices available only for
EFI applications.
EHCI Hand-off
Enables/disables a workaround for the operating systems
that have no EHCI hand-off support
Disabled is the default..
Device power-up
delay
Sets the maximum time that elapses before a USB device
reports itself to the controller.
Select Auto (default) to apply a 100 ms delay to the
root port and make the hub port use the delay from Hub
descriptor.
Select Manual to customize a delay from 1 to 40
seconds.