well
Page
3
of
7
BEFORE STARTING – Necessities Checklist
To assemble the arbn well gateway, you will need the following:
Main gateway body (grey)
LoRa and WiFi antennas
PoE adaptor (labelled PoE injector)
Region-specific kettle plug
An ethernet cable to connect the gateway to the PoE connector
A 5mm hex/Allen key to open the gateway and insert a SIM card (if not
in your box, please purchase one from any hardware store).
A data-only SIM card for the gateway, with at least 1GB of data (if not
provided, please purchase a SIM card from any provider).
An unlocked phone or tablet in which you can access the SIM.
HOW TO READ THIS DOCUMENT
This document is intended for owners of standard arbn well installations. It describes how
to assemble, install, and maintain the gateway that comes with your arbn well system.
The mounting instructions should be followed as closely as practical. Following these
guidelines is not a guarantee of certification by any certifying body or standards, nor the
achievement of points. While arbnco maintains these documents with care and regularly
updates them with the newest scientific guidelines, errors and misunderstandings can
occur. If you are unclear about anything described in this document or need any other
help with your arbn well system, please email
. The guidelines
in this document are not intended to be part of a professional code of practice, codes,
standards, or statutory requirements. Happy sensing!
