Configuring Input 1
Load Off
100 Ohm Load
50 Ohm Load
Compensate for
1 Second Delay
INPUT 1 CONFIGURATION
IRIG-B UNMODULATED
IRIG-B MODULATED
IRIG-B MANCHESTER
1 PULSE PER SECOND
DCF77
DISABLED
100%
Figure 4: Input 1 Configuration Screen
1. Press
to power on the 940A.
2. Connect the cable from the equipment you want to test to
Input 1.
3. In the Home screen CONFIGURATION menu,
touch
INPUT 1
.
4. In INPUT 1 CONFIGURATION display (see Figure 4) touch
the desired signal. For example, IRIG-B UNMODULATED.
5. Touch one of the Load configuration buttons, such as Load
Off.
6. Touch the Compensate for 1 Second Delay, if required. Keeps
the 940A time in sync with source.
7. Touch
when finished.
Configuring Input 2
From
the
Home
screen
CONFIGURATION
menu,
touch
INPUT 2
. Otherwise, the setup should be the same as for In-
put 1 as described above.
9
Summary of Contents for 940A
Page 10: ...x ...
