7.9 The Fault Screen
39
7.9
The Fault Screen
The fault screen provides some control over the behavior of the fault reporting and recording system
on the clock. The Clear box will remove the specific fault record from memory and the reported
fault from the status display. The Mask box deactivates the triggering of the specific fault. For
example, if you check the Mask box for Antenna, the status message will not appear and recorded
message will not be in memory if the antenna is disconnected or fails. The Latch box assures that
when a specific fault occurs that the status message will persist, and not disappear, until it is
cleared.
Figure 7.7: Fault Display Screen
