58
The Setup Menus
7.9.8
Setting the Pulse-Per-Day Mode
Use the Pulse-Per-Day mode to produce one pulse each day at the set number of seconds (and
fractional seconds) after midnight. See Figure 7.14.
Figure 7.14: Programmable Pulse Setup, Pulse-Per-Day Mode
Note:
Pulse width can be set in 10 millisecond increments from 0.01 to 600 seconds.
7.9.9
Setting the Single-Trigger Mode
Use the Single Trigger mode to trigger a pulse once per year at a specific day of the year and time
of day. Setup menus include entries for Julian Day, Hour, Minute, Second and Fractional Seconds.
To configure Single-Trigger mode settings, follow the procedure illustrated in Figure 7.15.
Figure 7.15: Programmable Pulse Setup, Single-Trigger Mode
