Arbiter Systems 1088A, Operation Manual

Page: 110 / 279

90 Serial Communication and Command Set
Set Option Control
Command: m,n,k,lXI
m,n,k,lXI configures the specified option in the clock, where m = 0 for option Slot A and m = 1
for the option Slot B. See Table 9.6.
Where:
m = 0 for option Slot A, and m = 1 for option Slot B.
n = option number (see table below)
k = security key; 1088
l =
use only if n specifies Option 28 . l = 0 for 60 Hz and l = 1 for 50 Hz.
Response:
C
Option Number, n Slot A Option Slot B Option
0 NONE NONE
1 3 4
2 10 17
3 11 17A
4 12 18
5 13 23
6 14 24
7 20A 27
8 23 29
9 25 32
10 28 33
11 – 34
12 – 35
Table 9.6: Option Control Settings
Note: There is no clock configuration or indication for Option 19, Out-of-Lock Relay.
Option Control Examples
Example 1 – Model 1088B, Slot A Option 28
0,10,1088,0XI
Note: the 0 before XI in the last command sets the Option 28 frequency to 60 Hz.
Example 2 – Model 1088B, Slot B Option 32
1,9,1088XI