ARB Twin Bracket Installation Instructions & Owner'S Manual Download

Page: 4 / 6

REV A 04/19/2016

Page 4

Installation

1. Attach the Angle Bracket to the Compressor

mount in the tapered bolt location (should look like

picture when attached), with bolt and washer. Use

9/64” Allen Wrench to tighten the bolt.

2. Install the ARB Twin Compressor to the bracket.

3. Unplug and remove the horn. It is recommended

that you mount the horn on the bracket at this

point, but it can be done later as well.

Summary of Contents for Twin Bracket

Page 3: ... 04 19 2016 Page 3 Pieces Parts Item Part Number Description Qty 1 Bolt 1 2 Bolt 1 3 Tapered Bolt 1 4 Nut 1 5 Nut 1 6 Rev Nut 1 7 Washer 2 8 Star Washer 1 9 Bracket 1 10 Angle Bracket 1 1 2 3 10 9 8 7 6 5 4 ...

Page 4: ...red bolt location should look like picture when attached with bolt and washer Use 9 64 Allen Wrench to tighten the bolt 2 Install the ARB Twin Compressor to the bracket 3 Unplug and remove the horn It is recommended that you mount the horn on the bracket at this point but it can be done later as well ...

Page 5: ...osest to the passenger side using a 13mm socket and short extension DO NOT REMOVE 6 Using the 17 32 drill bit drill in the 2nd hole to widen it WEAR EYE PROTECTION Make sure there are no wires under the hole that you could possibly drill into and use a sharp drill bit a Deburr file the hole and put some touch up paint in it to prevent rusting ...