RESOLUTION OF PROBLEMS 08
Low fluid level alarm / indication:
•
Use only the fluid provided by the
manufacturer, the use of any other fluid
could damage the equipment and void the
warranty.
•
If at any time the equipment shows us the
screen of "insufficient liquid / tank fill", we
must proceed to fill the tank.
•
Connect the tube for filling, in the
“unmarked”
socket, located on the side of
the equipment and the other end of the
tube, insert it into a bottle filled with fluid
and press the fill key, (key on the left).
•
The
equipment
will
fill
the
tank
automatically and the filling will be
interrupted, once it is completed.
•
Once
the
filling
process
has
been
completed, to exit the "Fill / empty" tank
screen, press the key
RESOLUTION OF PROBLEMS
The equipment does not turn on normally :
Or when we are going to turn it on, we find
that the power switch is previously activated,
(green light on), and the equipment do not
start, (do not load the program):
•
Press on
the power switch
to remove power
from the equipment.
•
Wait 5 seconds.
•
Re-act on
the power switch
and wait for the
program to start normally.
•
If it still doesn't start.
•
Press again on
the switch
to remove power
from the equipment.
•
Disconnect the plug from the mains.
•
Check if there is any fuse that has blown, if
so replace it.
•
Reconnect the equipment to the mains.
•
Proceed to press
the switch
again and wait
for the equipment to start normally.
•
If the equipment still does not start, call the
manufacturer's service technician.
POWER SWITCH
MAINS PLUG
Summary of Contents for Therapy Care C
Page 1: ...Rev 6 ...
Page 13: ...DECLARATION OF CONFORMITY ...
