17-06-2014 Page 8 of 14 ARB Copyright 2014
3789276
If you have any queries regarding the installation of this product please contact the distributor from whom it was purchased, or alternatively the ARB office in your state.
Head Office – ARB Corporation Ltd VIC:
42-44 Garden Street, Kilsyth, Victoria, 3137 Tel: (03) 9761 6622 Fax: (03) 9761 6807
WA:
(08) 9244 3553
NSW:
(02) 9821 3633
ACT:
(02) 6280 7475
SA:
(08) 8244 5001
QLD:
(07) 3872 3872
NT:
(08) 8947 2262
TAS:
(03) 6331 4190
SECTION 6: Tent checks & fitting record:
ARB
– Roof Top Tent Mount Kit
Tent mount kit part number
4
1
0
0
0
0
Warranty
Refer to ARB Products “Warranty Against Defects” booklet, available from your ARB dealer.
ARB provides a 2 year / 40,000km warranty with this product from date of purchase via the original
purchaser.
This warranty does not cover modifications / alterations, improper installation, abuse / misuse, accident, lack
of maintenance, normal wear and tear and exposure to harsh chemicals or solvents.
Safety Warnings
This product is designed for Thule or Rhino Vortex roof bars, ARB does not warrant installation on other
products.
Always observe local safety laws for long/overhanging loads when installing.
Loaded roof rack systems will affect the vehicles cross wind sensitivity, cornering and braking
characteristics. Driving techniques should be altered to suit by reducing corner speed and
increasing braking distance.
Do not make any modifications to the tent mounting system brackets such as drilling or bending.
Do not allow solvents, chemicals or oils to contact the tent, as damage can occur.
Maintenance Requirements
After the first 500km after fitment and at routine vehicle service schedules, screw torques as
described in this fitting instruction should be checked. (Please ask the company that fitted your
canopy for a copy of the fitting instructions) or contact ARB.
To clean, only use quality car care mild detergents, waxes and polishes. Do not use abrasive compounds
unless conducting repairs.
Tent mounting systems are highly structural, routinely check for signs of corrosion and movement.
Consult you ARB dealer immediately if you have concerns
Refer to the care instructions at the end of this document for further detail
Dealer Name and code:
(or CUSTOMER for
customer fitment)
Date:
Vehicle registration:
Vehicle Vin No:
Number of Kms:
Order No:
Cross bar type
(tick):
Thule Wing/Aero/Prof:
Thule Square:
Rhino Heavy Duty:
Rhino Vortex:
Awning also fitted:
Vehicle pre-existing damage / condition check (details):
(Tick)
All screw torques completed as detailed in the instructions
– ! Important !
All zips operate without binding
All window tension wires are included and fit
This booklet is placed with vehicle manual
Comments: