ARB 3434040 Fitting Instructions Download Page 1

 

13-1-99 

Page 

of 

4      

3782557

 

 

If you have any queries regarding the installation of this product please contact the distributor from whom it was purchased, or alternatively the ARB office in your state. 

Head Office – ARB Corporation Ltd VIC: 42-44 Garden Street, Kilsyth, Victoria, 3137 Tel: (03) 9761 6622 Fax: (03) 9761 6807 

WA:

(08) 9244 3553  

NSW:

 (02) 9821 3633  

ACT:

 (02) 6280 7475  

SA:

 (08) 8244 5001  

QLD:

 (07) 3872 3872  

NT:

 (08) 8947 2262  

TAS:

 (03) 6331 4190

 

 

 

ARB WINCH BULL BAR TO SUIT PAJERO GLS 1997 ON 

 

 No 

3434040 

 

 

 

WARNING 

FOR VEHICLES EQUIPPED WITH SRS AIRBAG 

WHEN INSTALLED IN ACCORDANCE WITH THESE INSTRUCTIONS, THE FRONT 

PROTECTION BAR DOES NOT AFFECT OPERATION OF THE SRS AIRBAG. 

 

TAKE NOTE OF THE FOLLOWING: 
 

 

THIS PRODUCT MUST BE INSTALLED EXACTLY AS PER THESE INSTRUCTIONS USING ONLY THE 
HARDWARE SUPPLIED. 

 

 

DO NOT USE THIS PRODUCT FOR ANY VEHICLE MAKE OR MODEL, OTHER THAN THOSE SPECIFIED 
BY ARB. 

 

 

DO NOT REMOVE LABELS FROM THIS BULL BAR. 

 

 

THIS PRODUCT OR ITS FIXING MUST NOT BE MODIFIED IN ANY WAY. 

 
FITTING KIT No 6171268 
 

USE PART 

No 

QTY 

DESCRIPTION 

CONTROL BOX BRKT 

3751357 

CONTROL BOX BRACKET 

TO B/BAR 

6151021 

BOLT M8 X 20mm 

 6151132 

NUT FLANGE M8 

 4581044 

WASHER FLAT M8  

B/BAR TO CHASSIS 

4581049 

10 

WASHER FLAT ½" 

 4581050 

WASHER SPRING ½" 

 6151100 

BOLT ½" X 1½" 

 6151138 

NUT ½" 

 6151104 

BOLT ½" X 4"  

 4581013 

WASHER LOCATING 

 4581007 

WASHER FLAT HD 13mm X 40mm 

No PLATE BRACKET  AND 

3751584 

NUMBER PLATE BRACKET 

NUMBER PLATE 

6151017 

BOLT M6 X 16mm 

 4581035 

WASHER FLAT M6 

 6151128 

NUT FLANGE M6 

ROLLER FAIRLEAD TO  

6151110 

BOLT 5/8" X 6" 

B/BAR 6151140 

NUT 5/8" NYLOC 

 4581051 

WASHER FLAT 5/8" 

WINCH TO B/BAR 

6151073 

BOLT UNC 3/8" X 1½" 

 4581048 

SPRING WASHER 3/8 

 4581040 

WASHER FLAT 3/8" X 1"  

 6821110 

RUBBER GROMMET 56mm DIA 

INDICATORS TO B/BAR 

3500080 

ARB INDICATOR KIT 

Summary of Contents for 3434040

Page 1: ...PPLIED DO NOT USE THIS PRODUCT FOR ANY VEHICLE MAKE OR MODEL OTHER THAN THOSE SPECIFIED BY ARB DO NOT REMOVE LABELS FROM THIS BULL BAR THIS PRODUCT OR ITS FIXING MUST NOT BE MODIFIED IN ANY WAY FITTING KIT No 6171268 USE PART No QTY DESCRIPTION CONTROL BOX BRKT 3751357 1 CONTROL BOX BRACKET TO B BAR 6151021 2 BOLT M8 X 20mm 6151132 2 NUT FLANGE M8 4581044 2 WASHER FLAT M8 B BAR TO CHASSIS 4581049 ...

Page 2: ...rclips which retain the side pins 6 Remove the side pins and side rollers from the roller fairlead 7 Position the roller fairlead hard up against the roller fairlead bracket on the bull bar 8 From the rear of the bull bar using the holes in the bull bar as a guide mark out the new hole position on the roller fairlead and drill out to 9 The winch clutch handle must be rotated to be easily accessibl...

Page 3: ...irlead in position over the two lower holes and fit two 3 8 x 1 bolts and 3 8 washers supplied in the ARB kit Finger tighten 16 Ensure the winch and roller fairlead are aligned and tighten all bolts 17 Using the 5 8 x 6 bolts supplied place a flat washer under the head of both bolts and insert bolts through roller fairlead bracket and side rollers Fit the 5 8 nyloc nuts and tighten so that the rol...

Page 4: ...rectly aligned with the vehicle 23 Assemble number plate onto the bull bar using the M6 x 16mm bolts flat washers and flange nuts from the bolt kit 24 Fit the indicators to the bull bar and connect the indicator looms to the existing indicator loom with the Scotchloks supplied Test to ensure the indicators function correctly 25 Refit the splash pan NOTE Read the winch manual carefully before opera...

Reviews: