Arashi Vision Insta360 ONE RS, Quick Start Manual

Page: 7 / 100

2） Be sure to close the lock cover completely
to ensure the waterproofing is not affected.
Align the circular indication marks as shown
to the right. The yellow indication mark near
the lock buckle should be covered.
❸
Install the Mounting Bracket on ONE RS before using in water. The
Mounting Bracket will reinforce connections between all camera components.
Step 1: Open the Mounting Bracket
To open the frame, press the two red
unlocking buttons at the bottom of the
Mounting Bracket at the same time.
EN
5
Step 2: Insert ONE RS into the
Mounting Bracket
Buttons should be aligned
correctly
Step 3: Close the Mounting Bracket
Push the open side of the frame down until
its connecting points click in place.