Hikvision ANPR Configuration – Quick guide
6/26
Version 1.0 – Jasper Johansen – 13.03.2019 – ARAS Security A/S
4.
Click and drag the lane line to set the position or click and drag the end of
the line to adjust the length and angle. The area surrounded by yellow and
green lines stands for the detection area or the area of interest.
NOTE.
Only 1 license plate can be captured at the same time for each lane.
5.
For high accuracy rate, it is necessary to set the maximum and minimum
size of the license plates.
•
Manually take a snapshot with the camera when the license plate
appears in the detection area, and then measure the width in
pixels as shown in figure 4.
Figure 5 - How to measure a license plate pixel width using the Windows program Paint.
•
Set the license plate width parameters.
