ARAMA DCIPT12 Installation Instructions & Owner'S Manual Download Page 1 | Manualshive

Page: 1 / 16

ARAMA DCIPT12 Installation Instructions & Owner'S Manual Download Page 1

INVERTER PACKAGED TERMINAL

AIR CONDITIONER/HEAT PUMP

INSTALLATION INSTRUCTIONS & OWNER'S MANUAL

ARAMA HEAT PUMP MODELS

DCIPT9
DCIPT12
DCIPT15

ATTENTION INSTALLATION PROFESSIONAL

As a professional installer you have an obligation to know the product better than the customer. This includes all
safety precautions and related items.

Prior to actual installation, thoroughly familiarize yourself with this instruction manual. Pay special attention to all safety
warnings.

Often during installation or repair it is possible to place yourself in a position which is more hazardous than when the unit

is in operation

.

Remember it is your responsibility to install the product safely and to know it well enough to be able to instruct a customer
in its safe use.

Safety is a matter of common sense, a matter of thinking before acting. Most dealers have a list of specific good safety
practices, follow them.

The precautions listed in this Installation Manual are intended as supplemental to existing practices. However, if there a
direct conflict between existing practices and the content of this manual, the precautions listed here take precedence.

1
2
3
...
»

Summary of Contents for DCIPT12

















Reviews:

No comments

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands