manualshive.com logo in svg

araknis AN-100-AP-I-N, Product Manual

Share
Download
araknis AN-100-AP-I-N Product Manual Download Page 75

© 2016 Araknis Networks

®

75

Araknis Networks Wireless Access Point

Product Manual

Advanced Menu

-Return to Table of Contents-

23.7.1 - SNMPv2 Settings

This screen allows configuration of SNMPv2 Settings.

Figure 66. 

SNMPv2 Settings

Path – 

Advanced, SNMP, SNMPv2

Parameters – 

•  Status –

 Select Enable to enable SNMPv2. Select Disable to disable SNMPv2. 

Default: Enable

•  Contact –

 Enter the name of the person managing the SNMPv2 server. 

Default: Blank

•  Location –

 Enter the physical location of the SNMPv2 server. 

Default: Blank

•  Port –

 Indicates the port number for SNMPv2 ‘listening’.

Default: 161 (This is a dedicated TCP/UDP port and typically should not be changed.)

•  Community Name (Read Only) –

 Indicates the password for SNMPv2 read only access. 

Default: Public. ‘Public’ is a typical default of SNMP v2 devices for Read Only.

•  Community Name (Read Write) –

 Indicates the password for SNMPv2 read/write access. 

Default: Private.

•  Trap Destination –

 An SNMPv2 Trap is a notification of a network event such as a fault or security 

event. The Trap Destination is typically the IP address of the SNMP server where trap messages 
will be sent.

•  Port

 – Indicates the SNMPv2 port number for ‘receiving traps’.

Default: 162 (This is a dedicated TCP/UDP port and typically should not be changed.)

•  IP Address

 – IP address of the SNMPv2 server that will receive SNMP traps.

•  Community Name

 – Indicates the password for the SNMPv2 trap community.

Configuration Instructions – 

 

1.  Click 

Advanced, SNMP

.

2.  Specify the SNMPv2 settings.

3.  Click 

Save

, then 

Apply Changes

 to enable the new settings.

Summary of Contents for AN-100-AP-I-N





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands