Araknis Networks 100 Series Quick Start Manual Download Page 3

www.araknisnetworks.com  |  Support: 866.838.5052

3

Warnings indicate information vital to the safety to the installer or end user of the product.  

Warnings are always provided before the information they relate to. Not following a warning 

may result in permanent damage to equipment and serious injury or death of the installer or 

end user.

Warnings

Cautions

The caution symbol is used to indicate information vital to the safety of the equipment in use 

with the product, or the product itself. Cautions are always provided before the information 

they relate to. Not following a caution will almost always result in permanent damage to 

equipment that is not covered by warranty.

Notes

Notes emphasize information important to the installation, setup, or use of the product that 

are not essential to follow for safety of the equipment or user. Notes may be located before or 

in the midst of the section they apply to, depending on the type of information.  These items 

are usually essential information, like the size or dimension of a separate part required, or a 

critical step in the process, that, if missed, would cause the installer or end user extra work 

to overcome.

Pro Tips

Pro tips are included in sections of the manual to add information that provides extra value, 

utility, or ease-of-use for the installer or end user of the product.  Pro tips may also link to 

extra information that will provide a better understanding of application, technology or use 

of the product or feature in question. These items are not required, but have been added for 

your convenience.

Summary of Contents for 100 Series













Reviews: