70
"JOB MENU" - ZOOM ALL
15.6
Zoom all
Overview of the field during spraying
1
Press
Menu
.
2
Press the key at the side of menu
Zoom all
.
INDICATORS AND POINTS OF INTEREST ON THE FIELD
Surface inside the field perimeter
("SURFACE" function (par. 16.4)
Job breaking point, enabled with the "PAUSE" function (par. 16.3.1)
In this screen it is NOT possible to mark or modify this point.
General points of interest
Cursor
Machine position
Surface outside the field perimeter
(see "SURFACE" function)
Scale
Sprayed
surface
Display zoom adjustment:
F3
(
+
) zoom in,
F5
(
-
) zoom out
It indicates the machine position outside the
displayed area
Fig. 180
MARKING POINTS OF INTEREST
A
2
2
2
2
1
Fig. 181
The general points of interest can be memorized with this procedure
or with the specific function (par. 16.3.2).
It is possible to mark more points.
In this screen it is possible to memorize one point of the field even if the tractor is
in another position:
1
In field overview screen (Fig. 181) press
OK
.
Cursor
A
will appear.
2
Press
F4
/
F6
/
F7
/
F8
to move the cursor in the exact point to be
marked.
3
Press
OK
(Fig. 182).
4
Press
F7
/
F8
to select the type of marker.
5
Press
OK
to confirm (Fig. 183).
4
4
3
Fig. 182
5
Fig. 183
REMOVING POINTS OF INTEREST
1
In field overview screen (Fig. 184) press
OK
. Cursor
A
will appear.
2
Press
F4
/
F6
/
F7
/
F8
to move the cursor near or on the marked point;
when the point is selected, the symbol
will appear in the middle of the cursor.
3 - 4
Press
OK
twice to delete (Fig. 185) /
ESC
to cancel.
2
2
2
2
1
A
Fig. 184
3
4
Fig. 185
