9
7.2
Computer positioning
•
The
BRAVO 180S series computer must be placed in the control cabin of the farming machine. Observe the following precautions:
- Do NOT install the monitor in areas where it would be subjected to excessive vibrations or shocks, to prevent any damage or
accidental use of the control keys;
- Install the device in a visible position within easy reach by hand; bear in mind that the monitor should not obstruct the
operator’s freedom of movement or block his view.
Consider all necessary connections of the computer, the cable length, and make sure there is enough space for connectors and
cables.
An identification symbol is located next to each connector to indicate its function. For any reference to the system configuration
read par. 7.1 System recommended composition.
Fig. 6
Fig. 7
ITEM
CONNECTION POINTS
SECTIONS
MASTER
PRESSURE
WIDTH
A
1
Control unit and sensors
--
•
•
5.98"
2
Hydraulic unit
2
•
•
5.98"
3
Power supply
3
•
•
5.98"
4
Auxiliary connections
4
•
•
8.74"
5
USB
5
•
•
8.74"
7
•
•
10.55"
INSTALLATION
Summary of Contents for Bravo 180S Series
Page 41: ...Notes 41...
