ARAG 4679004, Installation, Use And Maintenance Manual

Page: 26 / 76

26
IMPLEMENT SETTINGS
11.8
Home > data and settings > implement settings > Tank
Allows setting the tank values:
11
2
3
Fig. 50
1 Indicate the reserve value under which the alarm is triggered.
The tank alarm is triggered when, during spraying, the tank level falls below the set value
(enable the appropriate function in the Info and alarms menu, par. 12.3).
For the procedure to be followed when an alarm occurs, please refer to par. 17.3.
2 Indicate tank capacity.
WHEN THE VALUE IS ON GRAY BACKGROUND, IT CANNOT BE CHANGED . In this
case the level sensor is installed and a tank profile is present in the IBX100 or a tank
calibration is required.
3 Select the tank volume display step from those proposed:
1
/
5
/
10
/
25
/
50
/
100
.
The Sensitivity display is ONLY present when entering in Home > Data and settings >
Implement settings > Basic settings > Tank level source > Level sensor
11.9
Home > data and settings > implement settings > Device calibration
Allows starting calibration for the devices connected to the VT.
1
2
4*
3
5*
Fig. 51
1
allows performing the zero calibration of the pressure sensor (
par. 11.9.1
)
if enabled in Home > Data and settings > Implement settings > Basic settings > Tank
level source > Level sensor
.
2
allows performing the zero calibration of the level sensor (
par. 11.9.2
).
3 allows performing the calibration of the tank profile
(par. 11.9.3).
4*
allows saving the calibration curve of the tank profile on the File server (
par. 11.9.4
).
5*
allows loading on IBX100 the calibration curve of the tank profile on the File server (
par. 11.9.5
).
to view the curve just loaded, it is necessary to restart the IBX100 as
described in the paragraph 12.7.
*The button is visible only if the VT supports the ISOBUS File server
feature.
Quits without confirming the
changes
Saves the changes
Cancel
Exits
Confirm
Goes back to previous menu,
or scrolls the pages of a menu
(previous page)
Scrolls the pages of a menu
(next page)
Goes back to main screen
Saves the changes to current
page