VP5000-DC/DC60, VP5000-DC/DC200-HL
Product description
Last edited 2019-02-08
by Sonja Scheunert
Filename
VP5000_DCDC60_200-HL_installation_manual_v1-4en.docx
75 / 173
Crimping pliers for AMPSEAL crimp contacts are required for crimping the contacts for the mating
connectors. The crimping pliers are not included in the scope of delivery of the mating connector.
TE connectivity manufacturer's designation TE connectivity order number
SDE PRO-CRIMPER III tool & die set AMPSEAL Hand tool assembly 58529-1 with die
assembly 58529-2
Table 34: Specification of the crimping pliers for
[ST1]
3.13.5
Mating connectors for [ST2] and [ST3]
Please note: If you need [ST2] and [ST3], order the mating connector and crimp contacts twice.
For a specific offer for your application, please contact our sales department.
ARADEX order no.: / figure
Description
VP_040015
Figure 57: Mating connectors for [ST2] and [ST3];
source: Intercontec
Material for mating connectors [ST2] and
[ST3], consisting of:
•
Connector housing
•
Insulating body "E"
•
17 female pins (crimp contacts
→
crimping pliers required)
•
17 male pins (crimp contacts)
This material set must be ordered for each
required mating connector.
Table 35: Specification of the mating connectors for [ST2] and [ST3]
For the specification of the supplied crimp contacts, see chapter 3.14.4 Product description,
Accessories that the customer must provide, Cables for [ST2] and [ST3].
Crimping pliers are required to crimp the contacts (series 623, Intercontec) for the mating
connectors. The crimping pliers are not included in the scope of delivery of the mating connector.
Intercontec manufacturer’s designation
Intercontec order number
Intercontec, crimping pliers, medium, with the
corresponding crimp insert for
∅
1 mm
contacts
Crimping pliers, medium, order number
C0.201.00
Crimp insert, order number C0.003.00
Alternative:
Intercontec, crimping pliers, small
Alternative:
Crimping pliers, small, order number
C0.101.00
Table 36: Specification of the crimping pliers for [ST2] and [ST3]
