MaxR-3210 Wireless-N Access Point User Manual
Arada Systems Confidential
13
v1.1, Dec 2009
Under the
Monitoring
tab on the main menu, select
System
to view the System screen, shown in
below. This screen shows the parameters listed in
Table 3-1. System Information Fields
Field
Description
Access Point Information
Access Point Name
Indicates the NetBIOS name. The default name may be changed, if desired.
Ethernet MAC Address
Displays the Media Access Control address (MAC address) of the Access
Point’s Ethernet port.
Wireless MAC address for
2.4GHz
Displays the Media Access Control address (MAC address) of the Access
Point’s wireless card when operating at 2.4GHz
Firmware Version
The version of the firmware currently installed.
Current Time
Displays the current system time of the access point.
Current IP Settings
IP Address
The IP address of the Access Point.
Subnet Mask
The subnet mask for IP address of the Access Point.
Default Gateway
The default gateway for the Access Point communication.
DHCP Client
Enabled indicates that the current IP address of the AP was obtained from a
DHCP server on your network. Disabled indicated a static IP configuration.
Current Wireless Settings for 802.11b/bg/ng
Operating Mode
Identifies the 802.11 operating mode of the MaxR-3210.
Channel/Frequency
Identifies the channel the wireless port is using. ‘Auto’ is the default channel
setting.
Rogue AP Detection
Identifies whether the Rogue AP detection feature is enabled or disabled.
