Arada BEC5X User Manual Download Page 3

OPERATING YOUR STOVE

 

Our stoves are designed to be operated with the 
fire door(s) closed at all times, apart from  
refuelling (when alight) or cleaning (when cold). 

Never leave the appliance unattended for an  
extended length of time with the door(s) open. 

Visit our Youtube channel for our ‘how-to’  
series of videos:  
http://www.youtube.com/aradastoves 

 

FUEL TYPES 

WOOD

 

Any type of wood is suitable provided it is well 
seasoned and has a moisture content below 
20%. This usually implies that the timber has been 
suitably stored to allow moisture to evaporate for 
at least nine months in the case of soft wood, 
and at least twenty four months in the case of 
hard wood. We recommend that for general 
burning wood should be split into logs of no more 
than 100mm (4”) diameter. 

 

SOLID FUEL

 

Arada recommends the use of HETAS approved 
smokeless fuels which have been deemed suitable 
for use on closed appliances, including multi fuel 
stoves.  These include: 

Homefire Ecoal   

 

 

Phurnacite 

Homefire Ecoal Instant Light   

Taybrite 

Homefire   

 

 

 

Newflame 

Homefire Ovals   

 

 

Maxibrite 

Supertherm  

 

 

 

Sunbrite 

Ancit  

 

 

 

 

Pureheat 

USER GUIDE

 

Becton User Guide 

LIGHTING THE FIRE

 

Prior to lighting the stove for the first time, 
check with the installer that the installation 
and all building work is complete. 

Ensure that you have read and understood 
these instructions before lighting the fire. 

 

AIR INLET CONTROLS

 

Your stove has two air inlet controls. These are 
located either on the stove body or the door. 

The primary air inlet providing under draught 
to the base of the fire chamber and the  
airwash system (secondary air) providing  
overdraught. 

The exact controls may differ from 

those illustrated in this manual but will work in 
the same way.

 

 

PRIMARY AIR

 

Air enters the appliance through the control 
on the bottom of the fire door. Your stove has a 
single control knob which slides left to right.  

 

AIRWASH SYSTEM / SECONDARY 
AIR 

The airwash has an internal sliding plate with 
slots, housed in a cover plate, and is located 
above the fire door. Sliding the control knob to 
the right as far as it will go, achieves the fully 
open position. 

 

 

 

Summary of Contents for BEC5X









Reviews: