Arachnid CMX5000, Instructions Manual

Page: 4 / 29

Dartboard Functions
POWER button -
Located on the lower right corner of the dartboard (when doors are open).
Be sure the AC Adapter is plugged into the jack on the right side of the dartboard. Press the
POWER button to turn game on or off.
GAME GUARD button
– Press to activate Game Guard Feature
SOUND button –
Press continually to set desired volume level or mute.
DOUBLE/MISS button - This button is used to activate the Double In/Double Out and Master
Out options for the “01” games. This function is only active when selecting 301, 401, etc.
games. The
MISS feature is active during play of any game. Press button to register a
“missed” dart. Player can press when dart lands outside target area so computer registers a
thrown dart.
DART-OUT/SCORE button
- The dart-out feature is active only during the “01” games (301,
401, etc.). When a player’s score falls below 160, he/she can press the DART OUT button to
get a suggestion from the dartboard as to the 3 darts needed to finish the game. Note:
doubles and triples are indicated with 2 and 3 dashes to the left of the number respectively.
The
SCORE feature allows player to access score not current on display.
BOUNCE OUT button
- Decide before play if you want to count darts that do not remain in
board (“bounce-outs”) or not. If not, simply press the BOUNCE OUT button immediately after
a bounce out occurs to deduct the score that registers.
SOLO PLAY
button – Press to activate Solo Play feature where you can play against the
computer. Press continually to cycle through the 5 different skill levels.
X X
82 ¼”
Wall Studs
7’ 9 ¼”
Toe
Line
5’ 8” from Floor
to center of
Bullseye
Dartboard