AR BLUE CLEAN
8840 - 8860 - 8870 - 8880
21. DRAWBACKS, CAUSES AND SOLUTIONS
PROBLEM
CAUSE
SOLUTION
WATER DOESN’T COME
OUT
Dirty water filter
Blocked intake valves
Clogged lance nozzle
Clean or replace
Check
Clean
INSUFFICIENT OR
IRREGULAR PRESSURE
Open detergent valve intaking air
Insufficient water supply
Pump intaking air
Worn out valve
Worn out or not suitable nozzle
Worn out gaskets
Exceeding water temperature
Encrusted coil
Check
Check the capacity
Check
Replace
Repalce
Change
Check
Descale
THE BURNER DOESN’T
TURN ON
Exceeding air intake
Dirty fuel filter
Dirty fuel pump filter
Dirty burner nozzle
Defected thermostat
Obstruct or broken electrovalve
Insufficient spark to the electrodes
Defected flow meter and/or
pressure switch
Motor pump joint
Insufficient or non exhisting
voltage
Check
Replace
Clean or replace
Replace
Repalce
Replace
Replace
Replace
Replace
Check
NOISY MACHINE
Air intake
Worn out, dirty or obstructed
valves
Exceeding water temperature
Check the intake tubes
PRESENCE OF WATER
IN THE OIL
Worn out water-oil seals
High level of humidity in the air
Replace
Check
OIL LEACKAGE FROM
THE HEAD
Worn out O.Rings in the seal
system
Replace
MOTOR DOESN’T START
WHEN PRESSING THE
SWITCH
The plug is not working due to
overheating
Check the plug, the hose
and the switch
MOTOR STOPS
SUDDENLY
The thermic protection is not
working due to overheating
Make sure that the tension is
suitable
22. DECLARATION OF CONFORMITY
USE AND MAINTENANCE HANDBOOK
page 17
https://www.kipogeorgiki.gr/
https://www.kipogeorgiki.gr/
