Rev A
1
OPERATING INSTRUCTIONS
MODEL DC7490
CAUTION:
Use supplied hardware for mounting. Torque to 4.5 inch lbs. max.
WARNING:
Do not exceed maximum power ratings. Do not drop. Internal
components are fragile.
Refer to drawing 10043587 at the end of this section for dimensions and connector locations.
Operation of the Model DC7490 is quite simple. The input signal is fed into the connector (J1) marked
INPUT
and the output is taken from the connector (J2) marked
OUTPUT
. The input and output connectors on the unit
are Type WR90.
Forward coupled output is taken from the jack (J3) marked
A
, and Reverse coupled output is taken from the
jack (J4) marked
B
. Both coupled output jacks on the unit are Type N (Female).
See Specification Sheet for detailed specification.