AR 10013130, Operating And Service Manual

Page: 14 / 68

Page 2 of 3
SPECIFICATIONS
POWER (fundamental), PEAK PULSE, @ OUTPUT CONNECTOR
Nominal ................................................................ 2200 watts
Minimum ............................................................... 2000 watts
FLATNESS ..................................................................... ±13 dB maximum, equalized for
±4 dB maximum at rated power
FREQUENCY RESPONSE ............................................... 2.5–7.5 GHz instantaneously
INPUT FOR RATED OUTPUT .......................................... 1.0 milliwatt maximum
GAIN (at maximum setting) ........................................... 63 dB minimum
GAIN ADJUSTMENT (continuous range) ......................... 35 dB minimum
INPUT IMPEDANCE ....................................................... 50 ohms, VSWR 2.5:1 maximum
OUTPUT IMPEDANCE ................................................... 50 ohms, VSWR 2.5:1 typical
MISMATCH TOLERANCE ............................................... Output pulse width foldback protection at peak reflected power exceeding 1000
watts. Will operate without damage or oscillation with any magnitude and phase
of source and load impedance. May oscillate with unshielded open due to
coupling to input. Should not be tested with connector off.
PULSE CAPABILITY
Pulse Width ............................................................ 0.07–30 microseconds.
Pulse Rate (PRF) ...................................................... 100 kHz maximum
Duty Cycle ............................................................. 4% maximum.
RF Rise and Fall ...................................................... 30 ns max (10% to 90%).
Delay ..................................................................... 300 ns maximum from pulse input to RF 90%
Pulse Width Distortion ............................................. ±30 ns maximum (50% point of output pulse width compared to 50% points of
input pulse width)
Pulse Off Isolation .................................................. 80 dB minimum, 90 dB typical
Pulse Input ............................................................. TTL Level, 50 Ohm nominal termination
NOISE POWER DENSITY
(pulse on) .............................................................. Minus 70 dBm/Hz (maximum), minus 72 dBm/Hz (typical)
(pulse off) .............................................................. Minus 140 dBm/Hz (typical)
HARMONIC DISTORTION ............................................. Minus 0 dBc maximum, Minus 1.5 dBc typical
PRIMARY POWER .......................................................... 190-260 VAC, single phase
50/60 Hz
1.2 KVA maximum
CONNECTORS
RF input ................................................................. Type N female on rear panel
RF output ............................................................... Type N female on rear panel
RF output sample port ............................................ Type N female on rear panel
Pulse input ............................................................. Type BNC female on rear panel
GPIB ...................................................................... IEEE-488 female on rear panel
Interlock ................................................................ DB-15 female on rear panel
COOLING .................................................................... Forced air (self-contained fans), air entry and exit in rear.
EXPORT CLASSIFICATION ............................................. ITAR. This document contains specifications for a commodity whose export is
governed by the U.S. International Traffic in Arms Regulations (ITAR). This
commodity must not be transferred to a foreign person/entity without proper
authorization of the U.S. Government. Violations may result in administrative,
civil or criminal penalties.